⚝
One Hat Cyber Team
⚝
Your IP:
216.73.216.112
Server IP:
65.21.180.239
Server:
Linux gowhm.eplangoweb.com 5.4.0-216-generic #236-Ubuntu SMP Fri Apr 11 19:53:21 UTC 2025 x86_64
Server Software:
Apache
PHP Version:
8.0.30
Buat File
|
Buat Folder
Eksekusi
Dir :
~
/
home
/
eplangoweb
/
tmp
/
awstats
/
View File Name :
awstats._wildcard_.eplangoweb.com.conf
# AWStats configure file #----------------------------------------------------------------------------- # Copy this file into awstats.www.myserver.mydomain.conf or awstats.conf and # edit this new file to setup AWStats (See documentation in docs/ directory). # The config file must be in /etc/opt/awstats, /etc/awstats or /etc (for # Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...) # To include an environment variable in any parameter (AWStats will replace # it with its value when reading it), follow the example: # Parameter="__ENVNAME__" #----------------------------------------------------------------------------- #----------------------------------------------------------------------------- # MAIN SETUP SECTION (Required to make AWStats working) #----------------------------------------------------------------------------- # "LogFile" contains the web server logfile to analyze. # Possible values: A full path, or a relative path from awstats.pl directory # Example: "/var/log/apache/access.log" # Example: "../logs/mycombinedlog.log" # # You can also use tags in this filename if you need a dynamic file name # depending on date or time (Replacement is made by AWStats at the beginning # of its execution). This is available tags : # %YYYY-n is replaced with 4 digits year we were n hours ago # %YY-n is replaced with 2 digits year we were n hours ago # %MM-n is replaced with month we were n hours ago # %DD-n is replaced with day we were n hours ago # %HH-n is replaced with hour we were n hours ago # %WM-n is replaced with the week number in month (1-5) # You can use 0 for n if you need current year, month, day, hour... # Example: "/var/log/access_log.MM-0%DD-0.log" # Example: "C:/WINNT/system32/LogFiles/W3SVC1/exMM-24%DD-24.log" # LogFile="/etc/apache2/logs/domlogs/_wildcard_.eplangoweb.com" # Put here your log format (Must match your web server config. See setup # instructions in documentation know how to configure your web server to have # the required log format). # Possible values: 1,2,3,4,5 or "your_own_personalized_log_format" # 1 = Apache native combined log format (NCSA combined/XLF/ELF log format) # 2 = IIS log format (W3C log format) # 3 = Webstar native log format # 4 = Apache or Squid native common log format (NCSA common log format) # With LogFormat=4, some features (browsers, os, keywords...) can't work. # 5 = ISA server native standard log format # "your_own_personalized_log_format" = If your log is a personalized format, # you must use the following syntax keys to define the log format string: # %host Host client name or IP address # %logname Authenticated login/user used on protected pages # %time1 Date and time with format: [dd/mmm/yyyy:hh:mm:ss +0000] # %time2 Date and time with format: yyyy-mm-dd hh:mm:ss # %methodurl Method and URL with format: "GET /index.html HTTP/x.x" # %methodurlnoprot Method and URL with format: "GET /index.html" # %method Method with format: GET # %url URL only with format: /index.html # %query Query string (used by URLWithQuery option) # %code HTTP return code with format: 999 # %bytesd Size of document in bytes # %refererquot Referer page with format: "http://from.com/from.htm" # %referer Referer page with format: http://from.com/from.htm # %uaquot User agent with format: "Mozilla/4.0 (compatible, ...)" # %ua User agent with format: Mozilla/4.0_(compatible...) # %gzipin Mod_gzip compression input bytes: In:XXX # %gzipout Mod_gzip compression output bytes & ratio: Out:YYY:ZZZpct. # %gzipratio Mod_gzip compression ratio: ZZZpct. # If your log format has some fields not included in this list, use # %other Means another field # # Examples for Apache combined logs (this two examples are equivalent): # LogFormat = 1 # LogFormat = "other time1 code refererquot %uaquot" # # Examples for IIS (this two examples are equivalent): # LogFormat = 2 # LogFormat = "host method code other referer" # LogFormat=1 # If you want to have information on domains/countries visitors, you must ask # AWStats to make reverse DNS lookup (if not already done in your log file). # If you set DNSLookup to 1, don't forget that reverse DNS lookup decrease # seriously AWStats time processing. # If you keep DNSLookup to 0, all hosts will be reported by the IP addresses # and not by the full hostname of visitors. Domain/Country chart will also # report all visitors from a domain/country "Unknown". # Possible values: 0 or 1 # Default: 0 # DNSLookup=0 # When AWStats updates its statistics, it stores results of its analysis in # files (AWStats database). All those files are written in the directory # defined by the "DirData" parameter. Set this value to the directory where # you want AWStats to save its database and working files into. # Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser" # feature (see later), you need write permissions by webserver user on this # directory. # Example: "/var/cache/awstats" # Example: "../data" # Example: "C:/awstats_data_dir" # Default: "." (means same directory as awstats.pl) # DirData="/home/eplangoweb/tmp/awstats" # Relative or absolute web URL of your awstats.pl directory. # This parameter is used only when AWStats is run from command line # with -output option (to generate links in HTML reported page). # Default: "/cgi-bin" (means awstats.pl is in "/mywwwroot/cgi-bin") # DirCgi="/tmp/awstats" # Relative or absolute web URL of all icons subdirectories. # Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon") # DirIcons="/images/awstats" # "SiteDomain" must contain the main domain name or the main intranet web # server name used to reach the web site. # This parameter is only used to generate full URLs links when ShowLinksOnUrl # option is set to 1. # Example: "www.mysite.com" # Example: "user.mydomain.com" # Example: "myintranetserver" # Default: "" # SiteDomain="_wildcard_.eplangoweb.com" # Put here all other possible domain names, addresses or virtual host aliases # someone can use to access your site. Try to keep only the minimum number of # possible names/addresses to have the best performances. # You can repeat the "SiteDomain" value in this list. # Use space between each value and put a backslash before each dot. # This parameter is used to analyze referer field in log file and to help # AWStats to know if a referer URL is a local URL of same site or an URL of # another site. # Example: "www.myserver.com x.y.z.w localhost 127.0.0.1" # HostAliases="*.eplangoweb.com _wildcard_.eplangoweb.com eplangoweb.com gsc-gas.co.eplangoweb.com gsc.eplangoweb.com www._wildcard_.eplangoweb.com www.eplangoweb.com www.gsc-gas.co.eplangoweb.com www.gsc.eplangoweb.com localhost 127.0.0.1" # When this parameter is set to 1, AWStats add a button on report page to # allow to "update" statistics from a web browser. Warning, when "update" is # made from a browser, AWStats is ran as a CGI by the web server user # defined in your web server (user "nobody" by default with Apache, "IUSR_XXX" # with IIS), so the "DirData" directory and all already existing history files # (awstatsMMYYYY[.xxx].txt) must be writable by this user. Change permissions # if required. # Warning: Update process can be long so you might experience "time out" # browser errors if you don't launch AWStats enough frequently. # When set to 0, update is only made when AWStats is ran from the command # line interface (or a task scheduler). # Possible values: 1 or 0 # Default: 0 # AllowToUpdateStatsFromBrowser=0 AllowFullYearView=3 #----------------------------------------------------------------------------- # OPTIONAL SETUP SECTION (Not required but increase AWStats features) #----------------------------------------------------------------------------- # The following two parameters allow you to protect a config file to be used # by your AWStats program called from a browser only if web user has been # authenticated. Your AWStats program must be in a web protected "realm" (With # Apache, you can use .htaccess files to do so. With other web servers, see # your server setup manual). # Possible values: 1 or 0 # Default: 0 # AllowAccessFromWebToAuthenticatedUsersOnly=0 # This parameter give the list of all authorized authenticated users to view # statistics for this domain/config file. This parameter is used only if # AllowAccessToAuthenticatedUsersOnly is set to 1. # Example: "user1 user2" # Default: "" # AllowAccessFromWebToFollowingAuthenticatedUsers="" # If the "DirData" directory (see above) does not exists, AWStats return an # error. However, you can ask AWStats to create it. # This option can be used by some Web Hosting Providers that has defined a # dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and # don't want to have to create a new directory each time they add a new user. # Possible values: 1 or 0 # Default: 0 # CreateDirDataIfNotExists=1 # In most case, AWStats is used as a cgi program. So AWStats process is ran # by default web server user (nobody for Unix, IUSR_xxx for IIS/Windows,...). # To make use easier and avoid permission problems between update process # (run by an admin user) and CGI process (ran by a low level user), AWStats # save its database files with read and write for everyone. # If you have experience on managing security policies (Web Hosting Provider), # you should set this parameter to 0. AWStats will keep default process user # permissions on its files. # Possible values: 1 or 0 # Default: 1 # SaveDatabaseFilesWithPermissionsForEveryone=0 # AWStats can purge log after processing it. By this way, the next time you # launch AWStats, log file will be smaller and processing time will be better. # IMPORTANT !!! # AWStats is able to detect new lines in log file, to process only them, so # you can launch AWStats as soon as you want, even with this parameter to 0. # With 0, no purge is made, so you must use a scheduled task or a web server # that make this purge frequently. # With 1, the purge of the log file is made each time AWStats is ran. # This parameter doesn't work with IIS (This web server doesn't let its log # file to be purged). # Possible values: 1 or 0 # Default: 0 # PurgeLogFile=0 # When PurgeLogFile is setup to 1, AWStats will clean your log file after # processing it. You can however keep an archive file (saved in "DirData") of # all processed log records by setting this to 1 (For example if you want to # use another log analyzer). # This parameter is not used if PurgeLogFile=0 # Possible values: 1 or 0 # Default: 0 # ArchiveLogRecords=0 # Each time you run the update process, AWStats overwrite the 'historic file' # for the month (awstatsMMYYYY[.*].txt) with the updated one. # When write errors occurs (IO, disk full,...), this historic file can be # corrupted and must be deleted. Because this file contains information of all # past processed log files, you will loose old stats if removed. So you can # ask AWStats to save last non corrupted file in a .bak file. This file is # stored in "DirData" directory with other 'historic files'. # Possible values: 1 or 0 # Default: 1 # KeepBackupOfHistoricFiles=0 # Index page name for your web server. # Example: "default.htm" # Default: "index.html" # DefaultFile="index.html" # Do not include access from clients that match following criteria. # If your log file contains IP addresses in host field, you must put here # matching IP addresses criteria. # If DNS lookup is already done in your log file, you must put here hostname # criteria. # Note: Use space between each value. # Example: "127.0.0.1 163.84. 201.101.51.1" # Example: "localhost abcxyz" # Default: "" # SkipHosts="" # You can specify specific IP addresses that should NOT be looked up in # the DNS. You may specify partial addresses (ie 163.85. for everything # behind the usual firewall setup, etc)... # This is only useful if DNSLookup=1. # Note: Use space between each value and put a backslash before each dot. # Example: "163.85. 201.101.51.2" # Default: "" # SkipDNSLookupFor="" # Use SkipFiles to ignore access to URLs that match one of following entries. # You can, with this option, add a list of not important frame pages (like # menus, etc...) to exclude them from statistics. # For example, to ignore a whole directory tree, just add "directorytoignore", # to ignore "users" pages in your stats, you can add "/~". # The oposite parameter of "SkipFiles" is "OnlyFiles". # Note: This parameter is not case sensitive. # Note: Use space between each value and do not remove default values. # Note: xxx$ means URL ending with xxx. # Example: "robots.txt$ favicon.ico$ badpage.html /~" # Default: "robots.txt$ favicon.ico$" # SkipFiles="robots.txt$ favicon.ico$" # Include in stats, only accesses to URLs that match one of following entries. # For example, if you want AWStats to filter access to keep only stats that # match a particular string, like a particular directory, you can add this # directory name in this parameter. # The opposite parameter of "OnlyFiles" is "SkipFiles". # Note: This parameter is not case sensitive. # Note: Use space between each value and do not remove default values # Note: xxx$ means URL ending by xxx. # Example: "marketing_directory" # Default: "" # OnlyFiles="" # Add here a list of kind of url (file extension) that must be counted as # "Hit only" and not as a "Hit" and "Page viewed". You can set here all images # extensions as they are hit downloaded that must be counted but they are not # viewed pages. URL with such extensions are not included in the TOP Pages/URL # report. # Note: If you want to exclude your own URLs from stats (No Pages and no Hits # reported), you should use SkipFiles parameter instead. # Example: "" # Example: "css js class gif jpg jpeg png bmp zip arj gz z wav mp3 wma mpg" # Default: "css js class gif jpg jpeg png bmp" # NotPageList="css js class gif jpg jpeg png bmp" # By default, AWStats considers that records found in log file are successful # hits if HTTP code returned by server is a valid HTTP code (200 and 304). # Any other code are reported in HTTP error chart. # However in some specific environnement, with web server HTTP redirection, # you can choose to also accept other codes. # Example: "200 304 302 305" # Default: "200 304" # ValidHTTPCodes="200 304" # Keep or attach the query string to the URL in the statistics for individual # pages. This is primarily used to differentiate between the URLs of dynamic # pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as # two different pages. Warning, when set to 1, memory required to run AWStats # is doubled. # Possible values: # 0 - URLs are cleaned from the query string (ie: "/mypage.html") # 1 - Full URL with query string is used (ie: "/mypage.html?x=y") # Default: 0 # URLWithQuery=0 # AWStats can detect setup problems or show you important informations to have # a better use. Keep this to 1, except if AWStats says you can change it. # Possible values: 1 or 0 # Default: 1 # WarningMessages=1 # To help you to detect if your log format is good, AWStats report an error # if the first NbOfLinesForCorruptedLog lines have all a format that does not # match the LogFormat parameter. # However, some worm virus attack on your web server can result in a very high # number of corrupted lines in your log. So if you experience awstats stop # because of bad virus records, you can increase this parameter (very rare). # Default: 50 # NbOfLinesForCorruptedLog=10000 # Search engines keywords reported are full search string or separate keywords # Possible values: # 0 - Search keywords reported are full search string (ie: "town maps") # 1 - Search keywords reported are separated words (ie: "town" and "maps") # Default: 0 # SplitSearchString=0 # You can add in the HTML report page a delay to force browsers to reload page # if page is loaded a second time after this delay (in seconds). # Example: 3600 # Default: 0 # Expires=0 # For some particular integration needs, you may want to have CGI links to # point to another script than awstats.pl. # Use the name of this script in WrapperScript parameter. # Example: "awstatslauncher.pl" # Default: "" # WrapperScript="" #----------------------------------------------------------------------------- # OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features) #----------------------------------------------------------------------------- # You can change value for following option to increase AWStats capabilities # (but this reduce AWStats speed). # Possible values: 0, 1 or 2 # Default: 1 # LevelForRobotsDetection=1 # 0 will increase AWStats speed by 1%. LevelForBrowsersDetection=1 # 0 disables Browsers detection. No speed gain. LevelForOSDetection=1 # 0 disables OS detection. No speed gain. LevelForRefererAnalyze=1 # 0 will increase AWStats speed by 6%. #----------------------------------------------------------------------------- # OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features) #----------------------------------------------------------------------------- UseFramesWhenCGI=1 # To avoid too large web pages, you can ask AWStats to limit number of rows of # all reported charts to this number when no other limit apply. # Default: 1000 # MaxRowsInHTMLOutput=1000 # Set your primary language. # Possible value: # Bosnian=ba, Chinese (Taiwan)=tw, Chinese (Traditional)=cn, Czech=cz, # Danish=dk, Dutch=nl, English=en, French=fr, German=de, Greek=gr, # Hungarian=hu, Indonesian=id, Italian=it, Japanese=jp, Korean=kr, # Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl, # Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru, # Spanish=es, Swedish=se, Turkish=tr, Ukrainian=ua # Default: en # Lang="en" # Set the location of language files. # Example: "/opt/awstats/lang" # Default: "./lang" (means lang directory is in same location than awstats.pl) # DirLang="/usr/local/cpanel/3rdparty/share/awstats/lang" # You choose here which summary report you want to see in the main page. # Whatever is your setup here, all detailed reports are still available. # So if you setup to 1 only ShowHeader, ShowMenu and ShowMonthDayStats, all # links in menu will still point to detailed views. # Possible values: 1 or 0 # ShowHeader=1 # Show AWStats head title and icon ShowMenu=1 # Show menu header with links on detailed reports ShowMonthDayStats=1 ShowDaysOfWeekStats=1 ShowHoursStats=1 ShowDomainsStats=1 ShowHostsStats=1 ShowAuthenticatedUsers=1 ShowRobotsStats=1 ShowPagesStats=1 ShowCompressionStats=0 # Show report of compression stats when using mod_gzip ShowFileTypesStats=1 ShowFileSizesStats=0 # Not yet available ShowBrowsersStats=1 ShowOSStats=1 ShowOriginStats=1 ShowKeyphrasesStats=1 ShowKeywordsStats=1 # Not yet available ShowHTTPErrorsStats=1 # This value can be used to choose maximum number of lines shown for each # particular reporting. # # Stats by domains MaxNbOfDomain = 25 # Stats by hosts MaxNbOfHostsShown = 25 MinHitHost = 1 # Stats by authenticated users MaxNbOfLoginShown = 10 MinHitLogin = 1 # Stats by robots MaxNbOfRobotShown = 25 MinHitRobot = 1 # Stats by pages MaxNbOfPageShown = 25 MinHitFile = 1 # Stats by referers MaxNbOfRefererShown = 25 MinHitRefer = 1 # Stats for keywords MaxNbOfKeywordsShown = 25 MinHitKeyword = 1 # Choose if you want week to start on sunday or monday # Possible values: # 0 - Week start on sunday # 1 - Week start on monday # Default: 1 # FirstDayOfWeek=1 # This parameter ask your browser to open detailed reports into a different # window than the main page. # Possible values: 1 or 0 # Default: 1 # DetailedReportsOnNewWindows=1 # List of visible flags with link to other language translations. # If you don't want any flag link, set ShowFlagLinks to "". # This parameter is used only if ShowHeader is set to 1. # Possible values: "" or "language_codes_separated_by_space" # Default: "en es fr it nl es" # ShowFlagLinks="en fr de it nl es" # Each URL shown in stats report views are links you can click. # Possible values: 1 or 0 # Default: 1 # ShowLinksOnUrl=1 # Maximum length of URL shown on stats page (number of characters). This # affects only URL visible text, link still work. # Default: 72 # MaxLengthOfURL=72 # AWStats can include a link to WhoIs database on all hostnames. For this, you # must set ShowLinksToWhoIs to 1. Warning, a such feature depends on next # parameter (LinksForWhoIs) and on WhoIs server exhaustivity and availability. # For this reason, this feature can't be a reliable feature. # Possible values: 1 or 0 # Default: 0 # ShowLinksToWhoIs=0 # Set here the link used to point to Internet WhoIs database. # This parameter is not used if ShowLinksToWhoIs is 0. # Default: "http://www.whois.net/search.cgi2?str=" # Example: "http://www.netsol.com/cgi-bin/whois/whois?SearchType=all&STRING=" # Example: "http://www.ripe.net/perl/whois?form_type=simple&searchtext=" # Example: "http://www.arin.net/cgi-bin/whois.pl?queryinput=" # LinksToWhoIs="http://www.whois.net/search.cgi2?str=" # You can put here HTML code that will be added at the top of AWStats reports. # Default: "" # HTMLHeadSection="" # You can put here HTML code that will be added at the end of AWStats reports. # Great to add advert ban. # Default: "" # HTMLEndSection="" # You can set Logo and LogoLink to use your own logo. # Logo must be the name of image file (must be in $DirIcons/other directory). # LogoLink is the expected URL when clicking on Logo. # Default: "awstats_logo1.png" # Logo="awstats_logo1.png" LogoLink="http://awstats.sourceforge.net" # Value of maximum bar width/height for horizontal/vertical graphics bar # Default: 260/180 # BarWidth = 260 BarHeight = 180 # You can ask AWStats to use a particular CSS (Cascading Style Sheet) to # change its look. # Example: "/css/awstats.css" # Default: "" # StyleSheet="" # Those colors parameters can be used (if StyleSheet parameter is not used) # to change AWStats look. # Example: color_name="RRGGBB" # RRGGBB is Red Green Blue components in Hex # color_Background="FFFFFF" # Background color for main page (Default = "FFFFFF") color_TableBGTitle="CCCCDD" # Background color for table title (Default = "CCCCDD") color_TableTitle="000000" # Table title font color (Default = "000000") color_TableBG="CCCCDD" # Background color for table (Default = "CCCCDD") color_TableRowTitle="FFFFFF" # Table row title font color (Default = "FFFFFF") color_TableBGRowTitle="ECECEC" # Background color for row title (Default = "ECECEC") color_TableBorder="ECECEC" # Table border color (Default = "ECECEC") color_text="000000" # Color of text (Default = "000000") color_textpercent="606060" # Color of text for percent values (Default = "606060") color_titletext="000000" # Color of text title within colored Title Rows (Default = "000000") color_weekend="EAEAEA" # Color for week-end days (Default = "EAEAEA") color_link="0011BB" # Color of HTML links (Default = "0011BB") color_hover="605040" # Color of HTML on-mouseover links (Default = "605040") color_u="FF9933" # Background color for number of unique visitors (Default = "FF9933") color_v="F3F300" # Background color for number of visites (Default = "F3F300") color_p="4477DD" # Background color for number of pages (Default = "4477DD") color_h="66F0FF" # Background color for number of hits (Default = "66F0FF") color_k="339944" # Background color for number of bytes (Default = "339944") color_s="8888DD" # Background color for number of search (Default = "8888DD") LoadPlugin="geoipfree"